North Coast CAD - Software & Hardware Phone: (800)724-4195 Fax: (716)663-9287
North Coast CAD Home
Request Info - Send feedback
North Coast CAD Home
Fine Point Innovations, Inc.
  • Slim, compact digitizer & display design
  • Electromagnetic technology
  • Cordless KCP-6 or KCP-7 pressure pens
  • ATI XPERT LCD video card
  • Software drivers
  • Current Web Page
Physical size: 10.4" x 14.0" x 1.8" (264 x 356 x 46 mm)
Weight: 5.3 lbs. (2.4 kg)
Display surface: Textured, Strengthened, Scratch-Resistant Glass with an Anti-glare finish
Cable: Single, non-detachable, 9 foot cable with an 18 inch breakout at the host computer end for serial port. Power cord plugs into serial connector.
Power: 12 Volt DC power supply, 2 Amp (Center Negative)

KCP6 (non-pressure) model: Tip switch and one barrel switch
KCP7 (pressure) model: Tip switch and one barrel switch
Battery powered: 1 AAAA alkaline battery
Weight: 23 grams
Spares: 3 replacement styluses, 1 AAAA alkaline battery

Type: Active Matrix Color TFT LCD
Resolution: 800 x 600 (SVGA)
Color Depth: 262,000 colors
Viewing area: 12.1" diagonal (246 x 184.5 mm)
Interface: PanelLink / Digital Flat Panel Port (20 Pin)

Technology: Electromagnetic
Resolution: 1016 ppi (40 ppmm)
Accuracy: +/- 0.01"
Pen slew rate: Up to 60 ips
Pen detection distance: Within 5 mm of surface
Pressure: 256 levels with optional Pressure Pen (KCP7)
Interface: RS232 / Serial Port

Video Card
Manufacturer: ATI
Chipset: Rage LT Pro
Bus: PCI 2.1
Video Memory: 8 MB

WINTAB driver for Windows 95/98 and Windows NT 4.0
CIC PenX for Windows 95/98 and Windows NT 4.0

Operating Systems Supported
Windows 95/98
Windows NT 4.0

Minimum System Requirements
20 Pin Digital Flat Panel Interface (ATI XPERT LCD Video Card - Supplied)
Available Serial Port
Available PCI Port
CD-ROM Drive
Mouse (Recommended for installation only)

One (1) year, parts and labor

Copyright North Coast CAD 1999. All rights reserved. Any other named products
profiled herein are trademarks of their respective companies.